Cine Movie Film

Anton Bauer Cine VCLX Dual Voltage Nickel Battery with 3 Pin & 4 Pin XLR Connect

Anton Bauer Cine VCLX Dual Voltage Nickel Battery with 3 Pin & 4 Pin XLR Connect
Anton Bauer Cine VCLX Dual Voltage Nickel Battery with 3 Pin & 4 Pin XLR Connect
Anton Bauer Cine VCLX Dual Voltage Nickel Battery with 3 Pin & 4 Pin XLR Connect
Anton Bauer Cine VCLX Dual Voltage Nickel Battery with 3 Pin & 4 Pin XLR Connect
Anton Bauer Cine VCLX Dual Voltage Nickel Battery with 3 Pin & 4 Pin XLR Connect
Anton Bauer Cine VCLX Dual Voltage Nickel Battery with 3 Pin & 4 Pin XLR Connect
Anton Bauer Cine VCLX Dual Voltage Nickel Battery with 3 Pin & 4 Pin XLR Connect
Anton Bauer Cine VCLX Dual Voltage Nickel Battery with 3 Pin & 4 Pin XLR Connect

Anton Bauer Cine VCLX Dual Voltage Nickel Battery with 3 Pin & 4 Pin XLR Connect

Anton Bauer Cine VCLX Dual Voltage Nickel Metal Hydride Battery with 3 Pin & 4 Pin XLR Connections, 560 Watt Hour CINE VCLX Charger. Anton Bauer CINE VCLX Battery.

Is a 14.4v and 28v 560Wh NiMH battery that provides dual simultaneous outputs and is ideal for high current applications. Power output is via two 4-pin XLR connectors for 14.4v and one 3-pin XLR connector for 28v.

This battery connects to the CINE VCLX charger and has an onboard computer that continuously communicates with the charger for maximum power efficiency. Exchanged information includes such factors as the battery age, self discharge, charge/discharge rate, cell imbalance and previously experienced charge/discharge cycles. Also built into the battery is an LCD monitor that accurately displays the percentage of remaining battery capacity at all times. To protect against damage to the battery, this battery has a low voltage cut-off feature which will automatically shut off the battery at 12 volts.

Accurately monitors the energy put into and taken out of the battery. This data is processed with sophisticated programs that take into account battery age, self discharge, charge/discharge rate, cell imbalance and previously experienced charge/discharge cycles. The battery constantly "learns" its precise state of charge and remaining capacity. This data is automatically transmitted to the charger.

Accurately displays the percentage of remaining battery capacity at all times. The multi-voltage output, both 14.4 volt and 28 volt makes this battery unique, making it the perfect application for most film cameras. Allows for 20 amp current drawn from 14.4 volt outputs and 12 amp draw from 28 volt outputs. The high quality design of the battery protects the cells from impact and normal operating use.

Like all professional Anton/Bauer batteries, this battery has been individually computer tested, for assurance of optimum capacity, voltage and overall quality. The battery has a low voltage cut-off to protect against damage to the battery. The low voltage cut-off is set to 12 volts. 2x 4-pin XLR for 14.4v 1x 3-pin XLR for 28v. 10 x 12.8 x 5.5 (25.4 x 32.4 x 14cm). 25 lbs (11.3 kg). 14.4 x 12.6 x 8.3. Anton Bauer CINE VCLX Charger. Features a slim and portable design and allows you to charge the Anton Bauer CINE VCLX, VCLX-CA, and VCLXS batteries. The Anton Bauer CS-GBC Charger Cable, not included, is required for connecting the battery. The charger supports a single battery at a time via a LEMO output port, and charges it in approximately 7 hours. In general, the CINE VCLX Charger will deliver a three-stage charge routine to each battery. Stage 1 will deliver a charge matched to the capabilities of the battery. During this stage, six separate cutoff methods are in operation, simultaneously, ensuring the fastest, safest charge for that battery. Stage 2 charging is a balancing or "equalize" mode which calculates each battery pack type to offset any imbalance of the battery's cells, created by unequal self-discharge or any capacity mismatch of the individual cells in the pack. This stage can vary in duration from zero to as much as 16 hours, depending on the condition of the battery.

A battery will typically leave Stage 2 in 2-4 hours under average operating conditions. Stage 3 charging is the Anton/Bauer exclusive Lifesaver maintenance mode. This patented pulse routine keeps batteries fully charged, free from self-discharge - indefinitely - without damaging heat associated with so-called "trickle charge". Anton Bauer CS-GBC Charging Cable.

Links your CINE VCLX or VCLX/2 battery to its charger. Each end of the cable features a 19-pin LEMO connector. Is specialized in Sales, Service, Rentals of Camera Support Equipment such as Sachtler, OConnor, Vinten, Cartoni, Miller, Libec, Manfrotto, Arri, Mitchell, Teradek, Anton Bauer, Core, Swit.

Wooden Camera, Small HD, Shotoku, and more. With more than 30 years experience in camera support systems repair, our business has been providing quality repair service at reasonable rates to Rental Houses, Broadcast Networks, Professionals, Hobbyists and other repair shops since 1987. Unlike others, TransFilm is first and foremost a service facility. We Deal in Both-New & Used Gear.

PR, HI, AK, APO, P. PLEASE VISIT MY STORE FOR MORE GREAT ITEMS!
Anton Bauer Cine VCLX Dual Voltage Nickel Battery with 3 Pin & 4 Pin XLR Connect